Make Easter mobile out of wire hangers

Make mobile from wire hangers - how it works!

Material:

12 wire hangers
Aluminum wire Ø 2 mm x 4 m and 1 metal ring Ø 30 cm (both eg via www.bastel-welt.de)
side cutter
flat-nosed pliers
tape measure
drill
screw
dowel
various decoration

Manual:

Cut off 25 cm of wire and form into a "V", so that both sides are approx. 20 cm long and when bent, a loop is formed in the middle. Wrap the free wire ends (each 2.5 cm) around the metal ring with a distance of about 8 cm. Repeat this 11 times so that 12 "V's are hanging on the ring.
Disconnect the hooks of the wire hanger with the side cutter. Use the pliers to bend one eyelet at the top end. Pass the lower end (about 2 cm) through the loop of the "V" and bend to an eyelet. Repeat this with the other 11 hooks.
For the mobile suspension, cut off 6 wire pieces of 15 cm each. Wrap the end of the first wire with the pliers around the metal ring, bend the other end to an eyelet. Wrap the end of the second wire around the loop of the first wire, bend the other end to an eyelet. Repeat this with the 4 other pieces of wire.
Cut off another wire piece of approx. 8 cm, round off one end, attach the 3 eyelets of the suspension and bend the wire end to an eyelet. The other end also bend to an eyelet.
Drill a hole in the ceiling, put in dowels, turn in hooks, hang mobile on it and decorate it with accessories.

Here you can find more nice ideas for homemade Easter decorations and tips to make beautiful things for Easter.