Knitting: Out into the country!
hole scarf
The thick scarf with lace pattern adorns a homemade "Order" of gift ribbon: Turn a rosette out of one piece with wire-reinforced ribbon. From a narrower band lay loops and pull through the center of the rosette, hanging out the ends at the bottom. Wool: ONline; Jacket: Clothcraft.
Knitting instructions
The scarf is 25 cm wide and 100 cm long. Material: 200 g pink wool, color no. 07 by ONline, quality "Tondo" (100% pure new wool, running length 45 m / 50 g), knitting needles size 10. Lace pattern: see scheme. It only shows the rows. In the back rows knit the sts as they appear, re. M. right, left M. li., The envelopes li. Scarf: Cast on 28 sts and work in back and forth rows according to the diagram, i. Knit 1 edge stitch (it is not drawn in the diagram and is knitted in every row), 2 times the repeat of the drawing and 1 edge piece again. work. In height the 1.10. Repeat 12 times, then bind off sts.
Tank Top, Beanie & Co
The headgear of the female clan members are self-made, as well as scarf and wrist warmers (front), which are worked in a wrong patent pattern. Instructions for the tank top in S (also men's size 46) and L. Wolle: Online. Blazer: Vero Moda; Blouse: René Lezard (back); white blouse: wit; Pants: Only; Belt: Barbara Milano.
instructions
Lime green tank top Size S and L. All figures for size L are in square brackets, provided that they differ from size S. Material: 300 g [350 g] lime green wool, color no. 37 by ONline, quality "Cora" (60% merino wool, 40% acrylic, running length 85 m / 50 g), circular needle size 6. diamond patterns: see schematic drawing. It shows the mesh image of the right side, i. in the back rows, the re. drawn M. li. and the li. drawn M. right to be knitted. Knitting tension: Knit in a rhombic pattern, 16 sts x 22 sts make 10 cm square.
Back: Cast on 72 sts (80 sts) and knit 6 cm in ribs (2 sts in reverse row, 2 sts each alternately), then cast on 1 st at end of last row. Then work in the rhombic pattern after the drawing. Set up the pattern from the center and repeat the repeat on both sides continuously. In height the 1.40. Repeat R. continuously. When piece measures 33 cm [32 cm] total, sts 4 sts on each side and dec 1 st twice every 2 sts and 1 st 5 times [6 times]. Cast off the middle 15 sts [19 sts] at a total height of 54 cm for the back neckline and finish the sides separately. Cast off 5 sts 1 time in the 2nd round. At the same time, at a total height of 54 cm for shoulder taper, cast 4 sts in each row, 1 st 4 times on every other row, then cast off remaining sts.
Front: How to knit the back. However, in 34 cm [33 cm] total height for the front neckline, immobilize the center stitch and finish the sides separately. In doing so immediately and 11 times in every 4th row [immediately, further S 3 times in every 4th row and 1 time in the following 2nd row, repeat continuously from S] 1 sts.
elaboration: Close the shoulder and side seams. For the panel from the neckline knit 106 sts [114 sts], the stoppage sts in the front. Take the middle with the needle and work in rounds in a rib pattern (1st round 2 sts in reverse, 2 sts in reverse, in the following round knit the sts as they appear, reverse sts on reverse. , left to right). Set up the pattern so that in the front. Middle only 1 st. knit at this point for the lace in each round as follows: take the center stitch on a needle, the M. in front of it with the following M., depending on the pattern re. or li. knit together and the Mittlm. pull over it. At 2.5 cm, bind off the sts. For the armhole panels, knit 72 sts [76 sts] off the edges and work in ribs 2.5 cm in a rib pattern, bind off the sts.
Instructions striped scarf
The scarf is without fringes 22 cm wide and 2.40 m long. Material: Wool from ONline, quality "Cora" (60% merino wool, 40% acrylic, running length 85 m / 50 g), 200 g in green color No. 44 and 100 g each in lime green color No. 37, khaki color No. 50 and Beige color No. 101, knitting needles size 6. Wrong patent sample: The number of stitches must be divisible by 4 and 3 sts, so that the pattern repeat rises. 1st row: S 3 sts in reverse, 1 st in left, from S onwards. to repeat. The row ends with 3 sts. 2nd row: S 1 st. Row, 1 st. Row, 2 st. Row, from S elv. to repeat. The row ends with 1 st of reverse, 1 st of left, 1 st of M. right. Repeat the 1st and 2nd series continuously.
stripe sequence for the scarf: each 22 rows in green, lime green, khaki and beige. Shawl: Cast on 43 sts in green and knit in rows according to the pattern indicated. Repeat the given color sequence 6 times, then work another 22 R. in green and bind off the sts. Tying fringes into the shawls.Cut three 25 cm long threads of one color and tie them together as a fringe in a shawl end, the other fringes work in the colors of the strip sequence.
Instructions knitted beret
Material: each hat 100 g ONLINE wool, quality "Tondo" (100% pure new wool, running length 45 m / 50 g), in olive green color no. 19 or rust color no. 20, 1 double pointed needles size 8.
Pattern: smooth right, in Rd.
Cap: It is knitted in Rd. Cast on 60 sts spread over 4 needles, bind to the round and knit 2 rounds in the rib pattern (1 sts in reverse, 1 st of each other alternately). In the 2nd round after the 5th st and then 5 times after every 10th st from the transverse thread of the front yard. 1 M. left knit out. Mark the beginning of the round with a safety pin. Then continue working in the basic pattern, doing the following round 6 times after every 11th st from the transverse thread of the prow. 1 st. knit out. Repeat these increases 6 more times in each subsequent 2nd round after each last increment. Then work 3 rd without increases. There are a total of 18 rounds knitted and 108 sts on the needles. At the 1st needle the 1st M. right. knit and lift to the 4th needle.
Mark this place with a safety pin, from here begin the following rounds. 19th round: S 1 sts, 1 st. and pull the lifted sts over it, 14 sts. (Intermediate mesh), 2 sts. Knitting, repeat from S 5 more times. Then remove 2 sts in every 3rd round and 5 times in every 2nd round, as described in the 19th round, but 12 sts instead of 14 in the 22nd round. , in the 25th round 10 M., in the 27th round 8 M., in the 29.Rd. 6 sts in the 31st round, and 2 sts in the 33rd round. work. In the 35th round only remove the sts as described. The Rd. Without declines are always re. knitted. Tighten the remaining sts with the end thread.
For the bobble lay two 4 cm wide and 20 cm long cardboard strips on top of each other, place a 35 cm long wool thread in between and wrap the boards together thickly with wool. Carefully cut the wool on one side between the cardboard and at the same time knot the wool thread between the cardboard so that the small woolen threads are held together in the middle. Sew the pompon on the cap.
